vaste question, Régis


[ chronomania.net - Les archives de l'ancien forum ]


écrit par villerville le 16 mars 2006 09:33:16:

en réponse à: Travail d'IWC sur ETA? écrit par Poire molle le 16 mars 2006 08:51:52:

Tout d'abord, il faut se rappeler que les plus grandes manufactures ont toujours repris des ébauches extérieures qu'elles ont modifié. De Rolex à Patek en passant par VC...toutes ont retravaillé des mouvements produits par d'autres.
IWC s'inscrit dans cette tradition. Producteur de mouvements depuis l'origine, IWC a repris des mouvements JLC et Eta qu'il a modifié.

December 2002 WatchTime écrivait :
On the "2892-A2, the watchmakers in Schaffhausen, Switzerland, have gone to the trouble of so luxuriously rebuilding the base calibre that you could almost describe it as a total revision. The most immediately notable feature of the modified calibre is the gold plating. After subjecting the calibre to comprehensive upgrading, it operates with significantly less friction and its balance swings through a larger arc. IWC insists on closer tolerances for endshake, meshing and truing in the flat than ETA permits. A lever is individually made for each movement. Nearly all critical components along the path from the escapement to the mainspring are removed from the movement and replaced with corresponding components from IWC's own manufacture. The escapement and balance are optimally fine-tuned and painstakingly adjusted."

Source : forum IWC

Le 2892-A2 de base :

La version IWC



Réponses:


[ chronomania.net - Les archives de l'ancien forum ]